|
Audio Asylum Thread Printer Get a view of an entire thread on one page |
For Sale Ads |
In Reply to: John C: I am considering a Pre-Processor... posted by Estes on December 20, 2002 at 05:28:11:
I tried to make an all-in-one theater/music system a few years ago, and essentially found out it can't be done, at least nowhere near a budget I could live with. A few hundred dollar 2 channel preamp sounds much better with music than any HT proc I've heard- Lexicon, Proceed, Yamaha, Denon, Marantz.I now have completely separate music & theater systems, and I'm much better off for it. But when I did integrate them, I ended up with either an Anthem or a CJ preamp (at different times) between the HT proc and amps. That was the most acceptable solution, although bass management was a problem.
If I were you, I'd keep the 2 channel pre and loop your HT proc's L/R channels through it. Or you could look for a stereo pre with surround processor loop, like the Anthem Pre-2L- much easier to use (no volume control changes required when switching between 2 ch. and multichannel).
Follow Ups:
This is such a good way to go if you're picky about your stereo music sources. Even though the front HT channels go through a tiny bit of extra cabling/circuitry, this movie sound is no great shakes to start with, though plenty fine for its purpose. IMO better not to degrade the good music and feed it straight into the good stereo pre.BM is not a problem if all your speakers are full range and you have a sub fed from the stereo pre, then you don't need any when the processor is set up properly...
This post is made possible by the generous support of people like you and our sponsors: