 
|
Audio Asylum Thread Printer Get a view of an entire thread on one page |
For Sale Ads |
|
|
Audio Asylum Thread Printer Get a view of an entire thread on one page |
For Sale Ads |
In Reply to: Re: How best to integrate subwoofers in HT/Stereo setup posted by bstan on February 18, 2003 at 13:52:50:
Thanks Bstan, your method seems to be the best way to keep these two modes of listening/viewing separate. Only problem is , I am in the UK, do you know of dealers in the US who would be able to supply the crossovers?
Follow Ups:
like this one from Hsu . It has a 2nd order high pass, and you could select 2 crossover freq. Make sure you don't get one of those high pass crossovers that has the infinitely adjustable crossover freq. They are implemented with a inferior sounding circuit design, or are implemented with a high precision and expensive multi-ganged pot.
Frankly, I think it's a pretty bad idea to try and match a 2nd order high-pass crossover filter to the 2nd order rolloff of you main speakers (if they are truly 2nd order rolloff which is mostly only true for acoustic suspension) and then try to match that mess with the internal low-pass crossover of the sub.For smoothly blending bass frequencies between mains and sub(s), I prefer something like a symmetrical Linkwitz-Riley (zero degree phase offset) crossover with a rather steep 24dB/octave slope.
This equalizes signal amplitude at the crossover frequency, and IMO makes it easier to pick a correct crossover frequency for a specific set of mains and sub(s).
Here is Marchand's website
This post is made possible by the generous support of people like you and our sponsors:
Top of Page ]
[ Contact Us ]
[ Support/Wish List ]
[ Copyright © 2024, Audio Asylum, all rights reserved ]