|
Audio Asylum Thread Printer Get a view of an entire thread on one page |
For Sale Ads |
141.150.12.126
In Reply to: Re: The Plot Thickens !! posted by Estes on November 14, 2004 at 14:48:13:
Estes,Thanks for your responses.
One more question?
The HK AVR525 would "shut down" the Center (I've had the M&K center since July 2003) after a loud transient starting about 2 months ago. (Ive had the HK and M&K working fine together for over 15 months with no problems) I'd power off the system and power back on ... most of the time it would be OK, until it hit the transient again. Sometimes, after a powering down/powering up, the center would not come back (sometimes it would come back 15 minutes after powering up again). When I hooked up the new Yamaha receiver this weekend it was going fine for the first 5 minutes, then boom .. no center ..... does this scenario lead you to beleive that it's any particular suspect (of the ones you've suggested) as opposed to any other ??
Follow Ups:
is there is something wrong with the speaker! You should try another speaker in that spot to see if the problem reoccurs. In terms of determining specifically what is wrong with your centre channel speaker, that is a job best left for the techs. If you have a multimeter, you can do a basic check to see that the circuit in the speaker is complete. If you don't know how to do what I just suggested, then take the center speaker back to dealer & describe your problem. Or contact M&K directly.
Ooops! I see you have contacted M&K!
I tried an 8 ohm center speaker and it works fine .. beat it to death with Terminator 3 last night and would not shut down.
So either the receivers you use do not like 4 ohm loads or there is something wrong with your M&K center. Either way the solution is to change speakers.I tend not to like most receivers because the power ratings are "optimistic" and they lack the power supplies to properly drive speakers.
This post is made possible by the generous support of people like you and our sponsors: