|
Audio Asylum Thread Printer Get a view of an entire thread on one page |
For Sale Ads |
OK HERE'S THE DEAL MY CURRENT SET UP IS A SONY DVD PLAYER AND A SONY RECIEVER OPTICALLY CONNECTED FOR DD AND DTS SOUND. THE PROBLEM IS AND YOU MIGHT LAUGH IS I WANT TO BE ABLE TO EQ THE SOUND. I CAN DO THIS WITH ANOLOG RCA CABLES AND USE PRO-LOGIC HOWEVER THE SOUND IS NOT "DOLBY DIGITAL" IS THERE AN EQ AVALIABLE THAT HAS OPTICAL INS AND OUTS AND IF SO WILL IT BE ABLE TO EQ THE 6 CH DD FORMAT AND WILL IT HAVE TO BE DOWNMIXED TO 2 CHANNEL SOUND.? I WANT TO WATCH MOVIES IN 6 CH DD FORMAT WITH THE ABILITY TO EQ THE SOUND TO MY PERSONAL PREFERENCE.TO MAKE A LONG STORY SHORT I WANT TO COME OUT OF MY DVD PLAYER INTO A EQ THEN OUT OF THE EQ TO THE RECIEVER USING OPTICAL CONNECTIONS HOWEVER, STILL MAINTAIN DD 6CH SURROUND SOUND
ANY HELP OR LINKS WILL BE APPRECIATED.?
Hi Joel,Last month I posted some suggestions to your previous optical eq post. Have you had a chance to call Sweetwater or investigate the Sony TAE9000ES as a preamp alternative?
A full 6ch digital equalizer with DD in and DD out is going to be quite expensive because it pushes the technology curve at this time.
IN-> [ DD decoder -> 6+ch digital eq -> DD encoder ] -> OUT
Also, I can forsee three problems: 1) audio latency going through the processing chain can easily cause a lipsync problem with video if you're planning a HT system, thus requiring a digital video delay; 2) the reencoding stage from 6ch PCM back to DD is going to compromise your audio fidelity; and 3) the DD encoder is going to be really expensive.
If you're dead set on doing this (and of course if money is no object), you might want to check out DVD mastering/recording equipment. It might be possible to get something computer based, so you can reuse your PC.
Please let us know what your search turns up!
Yours,--andy
thanks
As far as I know, there is no "optical-in, optical-out" EQ on the market. If there was, I would imagine it would be quite expensive. If I were in your situation, I would EQ after the receiver had decoded the signal. That is, if your receiver has pre-out and main-in jacks, you can put an EQ in there. If you only want to EQ the front two channels, then you could just do those. Or if you wanted to do them all you would need an EQ that handled 5 channels, or 6 if you count the sub. If your receiver doesn't have the pre-out and main-in jacks, it'll be pretty difficult to do it.BTW, why do you want to EQ the sound of movies? Can't you just use the tone controls for that? Or if you're trying to get rid of a bass resonance, maybe play around with sub placement or just EQ the sub channel (that should be relatively easy).
Regards,
RichardH
This post is made possible by the generous support of people like you and our sponsors: