Video Asylum

it does have pro-logic

68.42.95.24

[ Follow Ups ] [ Post Followup ] [ Thread: Display All Email ] [ Video Asylum ]

(A)

In Reply to: To start.... posted by grantv on September 14, 2006 at 14:10:25:

It does have dolby pro logic...
ron

Follow Ups:

Pro-Logic it is. - grantv 18:00:45 09/14/06 (7)
Run the standard audio right and left out into audio inputs you have spare (not phono) on the receiver. Hook the S-Video direct into your display. You may have to go through a menu or two to output Pro-Logic from your player instead of digital, but that's easy enough.
- Re: Pro-Logic it is. - ron 18:56:06 09/14/06 (6)
  and this will de-code the dvd so the surround will work? If this is the case, what am I missing by not getting a new receiver?
  Thanks for the help,
  ron
  - Re: Pro-Logic it is. - rico 08:33:40 09/15/06 (5)
    You will be missing 5.1 channel Dolby Digital or DTS. Pro Logic derives a phantom center and a a phantom rear channel from stereo material so what you are hearing are two real cahnnels and two derived channels (the rear channel may have two speakers but it is mono, not stereo). Plus, to my ears the Dolby Digital and DTS codecs are sweeter and more natural sounding than Pro Logic.
    - Re: Pro-Logic it is. - ron 09:59:13 09/15/06 (4)
      what about the dvd player itself? do they make them with decoders so that you can have true 5.1?
      thanks,
      ron
      - On a limb here... - grantv 12:26:29 09/15/06 (3)
        
        In Reply to: Re: Pro-Logic it is. posted by ron on September 15, 2006 at 09:59:13:
        
        They do have DVD players with decoding built in (most I think actually). Problem is your receiver would not be able to use it. If you had a 5 channel receiver with 5 inputs (such as the Audio Refinement unit made a while back), you could have 5.1 sound. If you're looking for movie surround however you'd be just as well of buying a new receiver.
        I can't think of any way your present Pro-Logic receiver can output 5.1 sound though, no.
        
        a new receiver it is... - ron 13:23:51 09/15/06 (2)
        
        In Reply to: On a limb here... posted by grantv on September 15, 2006 at 12:26:29:
        
        thanks for the help ya'll. Looks like I'll be getting a new receiver...
        Ron
        
        That'd be good. - grantv 16:44:00 09/15/06 (1)
        
        In Reply to: a new receiver it is... posted by ron on September 15, 2006 at 13:23:51:
        
        Depending on your room size, you may want to go ahead with 6.1 or 7.1. Most receivers now probably include this, so if you are happy with 5.1 you could get a used one for a good deal.
        
        There is another way...on the cheap. - phatty 11:19:01 09/28/06 (0)
        
        In Reply to: That'd be good. posted by grantv on September 15, 2006 at 16:44:00:
        
        Take a DVD player with 5.1 analog out.
        Receiver or AMP for L and R
        Another Receiver or amp for RRear, and L rear
        Another Amp or receiver for Center
        A powered Sub.
        I have the above set up using vintage amps ( receivers ) bought at tag sales for $ 20.00 each. Case in point Yamaha CR 420 for $ 15 .
        Plenty of Vintage speakers around also , cheap.
        You just have to adjust the volumes seperately, but it works fine.

This post is made possible by the generous support of people like you and our sponsors:

VH Audio

You can not post to an archived thread.