 
|
Audio Asylum Thread Printer Get a view of an entire thread on one page |
For Sale Ads |
|
|
Audio Asylum Thread Printer Get a view of an entire thread on one page |
For Sale Ads |
72.177.190.70
I have a Panasonic plasma which I calibrated using the THX feature on a DVD. I used the blue THX glasses also.I recently got a Denon 3930ci universal player.
Do I need to calibrate it also? If so, will th AVIA disc calibrate both pieces of equipment?
Follow Ups:
Your DVD player has some menu accessible parameters that are similar to your display's controls. Set them to neutral or standard and use the calibration disc while changing the controls on your display. You may have to change a setting or two on the DVD player, but it's always best to use the controls on the display first. They usually allow finer adjustment than the controls in a DVD player.Below is a link to a better calibration disc for the consumer. It's easy to navigate, has some patterns/signals not found on Avia and is more accurate than Avia and DVE. It's $25 via PayPal and you burn the disc. Don't have a burning program? DVD Decrypter and DVD Shrink (don't use the "shrink" feature) are free.
The calibration is only good for the player on which you ran the THX DVD. If you have a new player you should recalibrate with it. If you have two players connected to the TV, check your Pannie's manual to see if it permits independent calibration of each input.
When you calibrate a screen using a calibration disc, what you're really calibrating is the combination of player and screen. If you change players and the new player is set up differently to the old, you would need to recalibrate things to get back to the same visual on screen result as before.I don't know about the 3930ci but I do know that there are calibration settings in the setup menue for my Denon 2907 so I would bet you have similar or more extensive options with the 3930. The 2907 allows some adjustments such as gamma that aren't available to the user in the normal menu options of my TV. The discs I have, Digital Video Essentials and the GetGray Calibration disc, have test patterns that could probably be used to calibrate these settings but they probably require test equipment for measurement. My suggestion is to forget about those other settings unless you know what you're doing and simply redo the TV calibration settings that you originally did using the THX optimiser. That should give quite reasonable results and you can probably do a little better again with Avia or either of the 2 discs I mention (I prefer the GetGray disc for my LCD screen—it's specifically designed for fixed pixel displays). If you want to get even better results and don't have the appropriate test equipment and knowledge, which I suspect is the case or you wouldn't have asked the question you asked (not a put down, I'm in that boat myself), then get a professional calibration.
David Aiken
| ||||||||||||
| ||||||||||||
This post is made possible by the generous support of people like you and our sponsors:
Top of Page ]
[ Contact Us ]
[ Support/Wish List ]
[ Copyright © 2024, Audio Asylum, all rights reserved ]
