|
Audio Asylum Thread Printer Get a view of an entire thread on one page |
For Sale Ads |
In Reply to: Integrated a Tube Amp with a Reciever based HT system posted by Bernard on March 27, 2000 at 08:29:08:
If you hooked up wire from both the Outlaw and the Zen to the front B&W's, when you listened to one source, current would go to the other amp. This might be a potentially bad situation. A switcher box would seem the only way to go, short of separating the two systems. Have you considered using a 3-channel amp for the center and rears and use the Zen on just the fronts all the time? I know this would be somewhat of a compromise for timbre-matching using different amps across the front, but it may be unnoticeable.Regards,
RichardH
Well in that case I could just use the pre-outs from the Outlaw to the Zens without a hitch. My thing is, even though the B&W's are 91db efficient, won't there be a huge power disparity between the front mains at 5wpc and all other channels at 65wpc?Regards,
Bernard
Hi Bernard,It depends on how loud you are listening. Since the speakers are 91dB sensitivity, you would be using 1 watt to get 91dB, 2 watts for 94, 4 watts for 97, and that would be about where you'd have to stop on the Zen. If you'll never go that high, then it won't be a big deal, but movies can get loud; I don't know if it's the best idea to use the Zen for the fronts in HT mode.
If I were in your situation, I would just use the Outlaw exclusively for HT, and get a pair of super-efficient tube-loving bookshelf speaks to hook up to the Zen. Klipsch comes to mind, but I know there are tons of others out there.
RichardH
This post is made possible by the generous support of people like you and our sponsors: