|
Audio Asylum Thread Printer Get a view of an entire thread on one page |
For Sale Ads |
In Reply to: Center Speaker MUST match the stereo pair posted by John C.-Aussie on June 11, 2000 at 17:11:36:
Hi John:Totally agree. I'm not sure where the below posts are coming from but a seamless soundstage across the three fronts is required for HT and specially, for muli-channel music. As a matter of fact, three identical speakers would be optimal. I have also found that some of the so called timbre matched MTM center designs have problems tonally matching the mains from the identical manufacturers.
I have used a center of a different manufacturer from those of my mains in the past and the results were not the best (understatement). I found it preferable to use phantom mode as you suggested.
Regards,
Jet
ya ok whatever, like you can actually tell the difference if you have a quality center, if you have a quality center channel, then there should be problem...
This post is made possible by the generous support of people like you and our sponsors: