Video Asylum

• Re: HDTV only has one set of component inputs! HELP? - jeechung 18:39:16 12/12/01 (0)
  In Reply to: HDTV only has one set of component inputs! HELP? posted by floyd on December 08, 2001 at 09:47:58:

  Check out the following link which shows a similar product that has RCA connections. The link was posted in this forum a while ago:

  http://www.keydigital.com/detail.asp?product_id=KD-SW2x1
  
  
  

  ---
• I have an Inline IN3552R availabie - lwang 09:32:01 12/12/01 (0)
  In Reply to: HDTV only has one set of component inputs! HELP? posted by floyd on December 08, 2001 at 09:47:58:

  If you are interested.

  2 RGBHV in, 1 RGBHV out, 650 Mhz bandwidth.

  www.inlineinc.com/products/matrix/3552R.htm
  
  

  ---
• Re: HDTV only has one set of component inputs! HELP? - Jim_F 03:05:27 12/09/01 (4)
  In Reply to: HDTV only has one set of component inputs! HELP? posted by floyd on December 08, 2001 at 09:47:58:

  This was the solution I found to the same problem.

  http://www.inlineinc.com/products/matrix/3582.htm

  
  It was about $300, but is of excellent quality and completely automatic.
  
  

  ---

  • Re: HDTV only has one set of component inputs! HELP? - floyd 07:17:58 12/09/01 (3)
    In Reply to: Re: HDTV only has one set of component inputs! HELP? posted by Jim_F on December 09, 2001 at 03:05:27:

    where did you buy it at? Thanks
    
    

    ---

    • Re: HDTV only has one set of component inputs! HELP? - Jim_F 17:12:26 12/09/01 (2)
      In Reply to: Re: HDTV only has one set of component inputs! HELP? posted by floyd on December 09, 2001 at 07:17:58:

      I bought mine from A-Vidd (www.a-vidd.com) They sell professional video products, but had no problem selling me one over the phone.

      The switcher has BNC connections (one more sett than needed for component video) but a trip to Radio Shack for 9 inexpensive (gold-plated if you like) connectors easily changes it to RCA connections.

      
      
      

      ---

      • Re: HDTV only has one set of component inputs! HELP? - David_Pitkin 12:33:29 12/12/01 (1)
        In Reply to: Re: HDTV only has one set of component inputs! HELP? posted by Jim_F on December 09, 2001 at 17:12:26:

        Did you have to solder the connectors onto the cables or are they just plug-convertors with a male BNC and female RCA?

        I am pretty intersted, this way my HDTV,DVD and GameCube could be simultanously be connected to my tv...
        
        

        ---

        • Re: HDTV only has one set of component inputs! HELP? - Jim_F 14:57:10 12/12/01 (0)
          In Reply to: Re: HDTV only has one set of component inputs! HELP? posted by David_Pitkin on December 12, 2001 at 12:33:29:

          No soldering required. They are exactly that type of plug-converter.
          
          

          ---
• Re: HDTV only has one set of component inputs! HELP? - thesiberian 22:43:35 12/08/01 (0)
  In Reply to: HDTV only has one set of component inputs! HELP? posted by floyd on December 08, 2001 at 09:47:58:

  The only way I know of currently is with one of the new dolby digital receivers that are on the market. they have two inputs and one output.
  
  

  ---

This post is made possible by the generous support of people like you and our sponsors:

Parts Connexion

---

[ Top of Page ] [ Contact Us ] [ Support/Wish List ] [ Copyright © 2024, Audio Asylum, all rights reserved ]

---

[ General ] [ Speakers ] [ Tubes ] [ Vinyl ] [ Digital ] [ Hi-Rez ] [ Video Asylum ] [ Cables ] [ Tweaks/DIY ] [ Music ] [ Films ]

---