 
|
Audio Asylum Thread Printer Get a view of an entire thread on one page |
For Sale Ads |
|
|
Audio Asylum Thread Printer Get a view of an entire thread on one page |
For Sale Ads |
In Reply to: Re: Interesting posted by bmar on January 05, 2002 at 20:45:15:
I'm not sure I understand.Let's say we both calibrate to reference volume with a common SPL level and choose to listen at some decremented level (say -5dB) below reference level.
If I record SPL levels at my seat at this -5dB level and come up with 100dB on the meter (for 88dB sensitive speakers) and my friend also listens at -5dB and records 100dB on the meter (for 100dB sensitive speakers), I'm not sure I see the difference in speaker sensitivity making a difference.
Does sensitivity make a difference beyond how much amplifier power is needed to get to a specific SPL? Granted, some speakers with a higher sensitivity may produce more detail at a lower overall SPL output, and thus can be enjoyed at lower SPLs.
Am I missing something? Did I make some bad assumptions?
bstan
Follow Ups:
Hi,I may be off base here, but consider this. the amp has no idea how well the speaker are using the power it gives out. at least my denon has no place to input that data into it. so i would guess that the sound levels the amp is associating with -10, -20 or -30 is output wattage to a generic most popular type of speaker environment.
this post started out with people talking about listening at at -10 and -20. I have a 17 x 15 x 9 room with two large opening to adjacent rooms. I listen to most movies at -30 to -35 this gives me spl of 85 plus higher peaks. i turn the amp up to -20 to -25 to show some one an effect or something but this is around 100db! a bit strong for just listening.
ok so the point, the speaker playing this are 102db efficient JBL theater speakers. now when i hook up my old nasty speakers that also have 15" woofer and are 3way. I'm turning up the wolume to -15 to -20 to achieve the same sound, noise, affects.
unless the amp/receiver has an input funtion or can know how efficient the speaker is. the reference is just that, a reference.
thats why we sit on the couch with an spl meter, because we need to tune everything alike. and also why the first recommendation you get from any home theater speaker sales is your speakers have to match, and be able to work together so fornts dont overpower centers or surrounds and vice versa.
just my thoughts.......Bill
A further thought that I didn't add.The only difference will be the power required to get to that output level.
Regards,
That's the whole point of calibrating to reference levels though.-10dB is -10dB regardless of anything.
It's 95dB peaks from the main speakers, 105dB peaks from the subwoofer, regardless of speaker sensitivity, regardless of room size, regardless of amplifier power.
Calibration to reference is to provide consistent and repeatable results across disparate rooms, speakers, electronics etc.
Regards,
yep, my mistakeBill
This post is made possible by the generous support of people like you and our sponsors:
Top of Page ]
[ Contact Us ]
[ Support/Wish List ]
[ Copyright © 2024, Audio Asylum, all rights reserved ]
