|
SET Asylum Single Ended Triodes (SETs), the ultimate tube lovers dream. |
|
|
|
SET Asylum Single Ended Triodes (SETs), the ultimate tube lovers dream. |
|
In Reply to: RE: And these would be for a 45/2A3 in a high mid/Tweeter amp? posted by thermionic addictions on April 26, 2024 at 12:12:01:
0.04 * 600 = 24 watts (75 watt max for he 75tl)
With the 75tl you could consider doubling the plate voltage to 1200 volts. As it is, running a 75tl at 1/3 dissipation is way down in the curves. The tube will have less distortion if you can bring up its operating point and it will make more that the 6 to 8 watts this operating point will give you.
I know there is the whole "cheap 300b" operating point for the 75tl, but these tubes are getting more rare and a JJ 300b is cheaper than the Eimac now. I do understand the fun of using the Eimac tubes, having both a 304tl amp and a 35t amp in operation at the present (both in the +Kilovolt range).
This post is made possible by the generous support of people like you and our sponsors:
Follow Ups
- RE: And these would be for a 45/2A3 in a high mid/Tweeter amp? - Chip647 08:31:38 04/29/24 (2)
- RE: And these would be for a 45/2A3 in a high mid/Tweeter amp? - Best audiotransformers 12:34:01 05/11/24 (1)
- are you offering to sell transformers? - Tre' 07:35:06 05/15/24 (0)
Top of Page ]
[ Contact Us ]
[ Support/Wish List ]
[ Copyright © 2024, Audio Asylum, all rights reserved ]
