Home Video Asylum

TVs, VCRs, DVD players, Home Theater systems and more.

Re: Understanding Bass Management

First things first.

1) The THX mandated spec for crossover frequency is 80 Hz, with a 12dB slope for the high pass filter to the mains, and a 24dB slope for the low pass filter to the subwoofer. You want a swifter slope on the subwoofer to minimize localization effects out of the lfe channel.

2) The output to the subwoofer (actually the LFE channel) is padded by +10dB in the DD and DTS decoders, not by the analog output stage. Calibrating your subwoofer to a level value with the mains should get you flat response for music.

With respect to bass redirection, I'm not familiar enough with the Marantz receiver you're referencing to have a valid answer. What should happen though, is that the LFE gets redirected evenly across all speakers defined as Large. In your case, this would be front L+R.

One flaw I can see in all this is it looks like you might be duplicating frequencies between the crossover frequency in the subwoofer and the mains. I say this because the path looks like it would be:

Receiver L/R line output --> Jolida Tube Amp
Jolida Tube Amp SW output --> M&K Subwoofer

If there is no filter in the Jolida amp the mains will get a full range signal and the subwoofer will duplicate frequencies below the crossover frequency.

If you choose to implement this configuration I think this would be a better connection path, though you'll spend a lot more in cables....

Receiver L/R line output --> M&K Subwoofer
M&K Subwoofer L/R output --> Jolida amp.

On second thought, I think M&K sells some RCA filters that could be used in conjunction with the subwoofer to work this all out in the end. If that's the case, Bob's your uncle.

Regards,



This post is made possible by the generous support of people like you and our sponsors:
  Schiit Audio  


Follow Ups Full Thread
Follow Ups
  • Re: Understanding Bass Management - kotches 22:17:25 10/12/01 (0)


You can not post to an archived thread.