A question? - bstan - Video Asylum

A question?

Posted by bstan (A) on January 28, 2002 at 11:10:40

In Reply to: Latest Update... posted by Estes on January 28, 2002 at 10:39:09:

Just thought I'd ask, since I also own an SH500 processor hooked up to a 2-channel stereo preamp.

What process did you use to calibrate the speakers? Did you use the RadioShack SPL meter to calibrate speaker output levels? Did you adjust the speaker delay settings on the SH500 before calibrating these levels?

Method for obtaining best DD/DTS sound from this procesor:

1) Set Volume on SH500 to the "0" position on the SH500 display, i.e. hit the remote's "+" volume all the way up.

2) Use your stereo preamps volume control to adjust the main speaker's output level from an "HT calibration DVD" like Video Essentials or AVIA till it register's 75dB on the SPL meter at your listening position. Easiest way to measure is to put the SPL meter on a camera tripod in your listening seat (with the meter pointing forward and with a 45 degree upward slope).

3) Adjust speaker delay (for center and surround speakers that are closer than equadistant). For the SH500 use 1 foot closer = 1ms of delay.

4) Follow the calibration DVD's speaker adjustments around the room for each speaker using the SH500 remote's button for center, surround left, and surround right to adjust these speakers to a 75dB SPL reading.

When everything is calibrated this way, I can typically listen to most movies at 0dB, -3dB or at most -6dB on the SH500 master volume control and get very good DD/DTS sound reproduction. I use Dynaudio Contour speakers all around (see my equipment list below).

bstan

My Equipment List (Open in New Window)

This post is made possible by the generous support of people like you and our sponsors:

Follow Ups Full Thread

Topic - Have you heard a difference between DTS & Dolby Digital? - Estes 17:56:26 01/25/02 (27)

My DD vs. DTS experience - padreken 18:45:58 01/28/02 (0)

Rear sound field vs. occasional effects. - Brians 15:13:36 01/28/02 (0)

Re: Have you heard a difference between DTS & Dolby Digital? - sam9 16:20:31 01/27/02 (4)

Latest Update... - Estes 10:39:09 01/28/02 (3)

A question? - bstan 11:10:40 01/28/02 (2)

Great info!! Thanks! - Estes 05:57:38 01/29/02 (1)

Debatable - bstan 11:09:27 01/29/02 (0)

For those that can't hear the difference... - Joe Murphy Jr 19:51:57 01/25/02 (10)

You also need a vision site for those who claim DVD is better than film.... - Estes 12:20:35 01/26/02 (8)

DTS - Joe Murphy Jr 16:42:44 01/26/02 (7)

Re: DTS - kotches 18:49:46 01/27/02 (3)

Re: DTS - Corbett 12:06:33 01/28/02 (2)

Re: DTS - bobo1 22:53:50 01/30/02 (0)

Re: DTS - kotches 23:07:20 01/28/02 (0)

Re: DTS - Estes 04:48:11 01/27/02 (2)

the SH-AC500D processor - Joe Murphy Jr 08:14:39 01/27/02 (1)

Re: the SH-AC500D processor - Estes 14:00:19 01/27/02 (0)

I shouldn't really laugh at that, but hehehehe....I get it!!! nt - Dman 23:27:29 01/25/02 (0)

What processor do you have? - cfraser 18:10:58 01/25/02 (7)

Re: What processor do you have? - Estes 12:24:53 01/26/02 (6)

Thanks for the info, ... - cfraser 18:14:15 01/26/02 (5)

Yes it has been discontinued... - Estes 04:50:30 01/27/02 (4)

All I REALLY want is better control over the center channel sound... - cfraser 13:55:01 01/27/02 (3)

Re: All I REALLY want is better control over the center channel sound... - Estes 14:03:01 01/27/02 (2)

I will play around some more - cfraser 14:28:34 01/27/02 (1)

Price/Function Error - cfraser 18:50:33 01/31/02 (0)

None whatsoever. NT - Earl Hamner 18:09:07 01/25/02 (0)

Follow Ups

A question? - bstan 11:10:40 01/28/02 (2)

Great info!! Thanks! - Estes 05:57:38 01/29/02 (1)

Debatable - bstan 11:09:27 01/29/02 (0)

You can not post to an archived thread.