Re: A little sketchy

Posted by Uncle Albert (A) on October 31, 2004 at 06:53:05

In Reply to: A little sketchy posted by Ironwoods on October 31, 2004 at 06:36:05:

So the problem exsists with one of the Avance Elipson 680's (4 ohm)at the center position? NO, Epsilons never shut down
If the mains are not shutting down with the normal configuration, I'd think the impedence is not the issue here, as they are also rated @ 4 ohms. I agree
A cheap test with a coax replacing the optical could reveal a problem with the optical connection. Have you tried this? No, are you suggesting that the optical cable or circuitry for that optical connection may be at fault?
Does the H/K have a discrete center channel volume control? NO If so, where is this set?
Which input terminals are you using on the center? The "regular" center channel outs (using the HK's amp) .. I've also used a seperate tube amp to power the ctr channel with no success
What guage is the center channel speaker wire and how far of a run is it? Don't know exact guage but it's Monster XPÂ® Clear Jacket - Compact Speaker Cable - about 3 foot run.

This post is made possible by the generous support of people like you and our sponsors:

Follow Ups Full Thread

Topic - HK Receiver Center Channel shuts down - Uncle Albert 17:59:33 10/24/04 (19)

It'd make things alot easier.... - grantv 11:30:34 10/26/04 (9)

Re: It'd make things alot easier.... - Uncle Albert 06:52:55 10/30/04 (8)

Are you sure? The MX700 according to the M&K site is a subwoofer, not a center channel. NT - grantv 08:48:04 10/30/04 (7)

Oops ..... - Uncle Albert 17:06:01 10/30/04 (6)

That said.... - grantv 22:34:04 10/30/04 (5)

Re: That said.... - Uncle Albert 06:54:02 10/31/04 (4)

You mean that..... - grantv 12:01:20 11/01/04 (3)

Does the center have some sort of "breaker"??? NT - grantv 13:14:06 11/02/04 (1)

Re: Does the center have some sort of "breaker"??? NT - Uncle Albert 16:21:58 11/03/04 (0)

Re: You mean that..... - Uncle Albert 12:45:19 11/02/04 (0)

We're so sorry... - Ironwoods 10:40:02 10/26/04 (4)

Re: We're so sorry... - Uncle Albert 06:54:13 10/30/04 (3)

A little sketchy - Ironwoods 06:36:05 10/31/04 (2)

Re: A little sketchy - Uncle Albert 06:53:05 10/31/04 (1)

More ?'s - Ironwoods 09:53:52 11/08/04 (0)

And you didn't change anything? NT - grantv 09:27:38 10/25/04 (3)

NT - Uncle Albert 17:49:46 10/25/04 (2)

How many ohms is the center and what is the amp rated to? - grantv 18:34:01 10/25/04 (1)

Re: How many ohms is the center and what is the amp rated to? - Uncle Albert 06:55:09 10/30/04 (0)

Follow Ups

Re: A little sketchy - Uncle Albert 06:53:05 10/31/04 (1)

More ?'s - Ironwoods 09:53:52 11/08/04 (0)

You can not post to an archived thread.