Re: Mixing electrostatics w/dynamic drivers for HT?

Video Asylum

TVs, VCRs, DVD players, Home Theater systems and more.

In Reply to: Mixing electrostatics w/dynamic drivers for HT? posted by newtoHT on September 7, 2002 at 06:03:21:

If you are using a centre channel you will have to be careful with the matching - trust me, been there, tried all of that.
But I would not be too worried about the rears. I ran dynamic drivers there for years quite effectively although now I'm into DVD-A surround I have E/S at the back and side although it is probably overkill. I most certainly would not have bothered if it was only movies but music (which we have a lot of on LD, DVD & tape) is another ball park.
However there is no cheap way out of that centre channel. If funds were tight I would use a phantom centre until I could afford a matching unit(s). A first class sub, carefully placed (not easy) is more important IMO.
John

Peace at AA

This post is made possible by the generous support of people like you and our sponsors:

Parts Connexion

Follow Ups Full Thread

Topic - Mixing electrostatics w/dynamic drivers for HT? - newtoHT 06:03:21 09/07/02 (5)

BTW - mikebake 14:40:11 09/09/02 (1)

Re: BTW - Rich 20:21:59 09/09/02 (0)

Re: Mixing electrostatics w/dynamic drivers for HT? - John C. - Aussie 17:27:44 09/07/02 (0)

Use the search function... - Rich 06:59:00 09/07/02 (1)

Re: Use the search function... - floyd 07:21:08 09/07/02 (0)

Follow Ups

Re: Mixing electrostatics w/dynamic drivers for HT? - John C. - Aussie 17:27:44 09/07/02 (0)

You can not post to an archived thread.