|
Video Asylum TVs, VCRs, DVD players, Home Theater systems and more. |
|
|
|
Video Asylum TVs, VCRs, DVD players, Home Theater systems and more. |
|
In Reply to: Re: Questions on LCD projector and Component video connection? posted by millen on November 24, 2003 at 08:22:48:
When you disconnect the blue/Pb connection, you see gray because the red/Pr connection has a signal problem (ie, seeing gray means you're only getting the Y signal).Where is the problem? It could be the Pr input on the projector, the Pr output on the DVD player and/or the cable you're using for that part of the component signal.
To rule out the projector and the DVD player, leave the green/Y cable connected and take the blue/Pb cable and connect it at both ends to the red/Pr connectors. If the picture looks reddish, your red/Pr cable is bad. If it's still gray, then the projector and/or the DVD player has a problem with the red/Pr signal.
This post is made possible by the generous support of people like you and our sponsors:
Follow Ups
- Abe's right, there's a red problem. - Joe Murphy Jr 13:31:46 11/24/03 (2)
- Re: Abe's right, there's a red problem. - millen 14:44:45 11/24/03 (1)
- Smell the cheese after you cut it -- not before. - Joe Murphy Jr 16:23:53 11/24/03 (0)
Top of Page ]
[ Contact Us ]
[ Support/Wish List ]
[ Copyright © 2024, Audio Asylum, all rights reserved ]
