In Reply to: Re: What should I buy ?plasma vs. projector ? posted by Rod M on March 25, 2004 at 09:49:37:
Plasmas on the market are now rated to about 60,000 hours before the light output is half of what it was when new. Models released in the last two years were rated to about 30,000 hours -- the same rating for CRTs. Will it be of no use at 30,000 hours? Of course not! Along the way, you'll just nudge the brightness and contrast controls a bit. To put that into perspective, 30,000 hours = 4 hours a day for 20 years.Consider the fact that most people get a new TV every 7 - 10 years and I believe you will get my point. Even if the estimates are off by 25%, that still comes out to 15 years for a plasma to the half brightness point.
What precautions are in your best interest? You don't need an ISF calibration for a plasma (unless you want one), but you should get a copy of Digital Video Essentials or Avia to calibrate the display. Actually, this should be done for any display type -- not just plasma.
If you are a heavy gamer, watch mostly 4:3 aspect ratio material and don't want to stretch it to 16:9 or use your display for computer use, plasma is probably not for you. Although, if you read many of the comments in the Plasma and Flat Panel LCD Displays section of AVS Forum, this doesn't stop many people from doing just that.As for prices, you can get a 50" Panasonic TH-50PHD6UY, Sanus Systems VMPL2 wall mount and Panasonic DVI-HDCP card with a DVI cable delivered for $6175.
You have questions? We have answers:
This post is made possible by the generous support of people like you and our sponsors:
Follow Ups
- half brightness - Joe Murphy Jr 18:40:13 03/25/04 (2)
- Re: half brightness - michael w 03:16:40 03/26/04 (1)
- calibration - Joe Murphy Jr 17:41:24 03/26/04 (0)