|
Video Asylum TVs, VCRs, DVD players, Home Theater systems and more. |
|
|
|
Video Asylum TVs, VCRs, DVD players, Home Theater systems and more. |
|
In Reply to: FACT or FICTION posted by Peter J on May 13, 1999 at 06:01:30:
... that you must start with a clean, possibly weak, signal. If there is NOT a clean signal to start with, then all an amp will do is amplify the noise along with the signal. Then, you will have a dirty, strong signal which is really no improvement. In most stores where they have many sets running, they NEED to amplify the signal.Rooftop antennas (usually) provide adequete signal for 2 to 4 sets if properly split, all cables are good, connectors properly installed, and unused splitter outputs are terminated.
You would be surprised how many problems are caused by loose F connectors. They may look good but may not be crimped correctly. I have noticed that, in many cases where 3 (out of 4 ) sets are working fine but the fourth isn't, there's a good possibility there's a problem with the cable or the connectors.
Generally, if you have to use an amp, it should be installed as close to the antenna itself.
This post is made possible by the generous support of people like you and our sponsors:
Follow Ups
- Rod is right... let me add - Markw 05:33:11 05/14/99 (0)
Top of Page ]
[ Contact Us ]
[ Support/Wish List ]
[ Copyright © 2024, Audio Asylum, all rights reserved ]
