Question on the JVC AV-36D201/501 televisions

Video Asylum

TVs, VCRs, DVD players, Home Theater systems and more.

63.38.146.64

My JVC AV-36D201 is being delivered this week, and while a minor detail, I'm curious. Now I know that Video 2 shares the composite input and the component input. So you can't use both, you must select between the 2.

Now I know there were some televisions that offered simpler component video hook up, but this television just offered such a good picture, others were out of consideration.

Since I will "have" to use S-Video(satellite and S-VHS VCR) and composite(Standard VCR)video, I will run out of television inputs. On my older televisions, Video 1 offered composite and S-Video inputs, but could "not" be used together, with both outputs from an A/V receiver. Are these JVC models any different? Is Video 1 either S-Video or Composite Video, not both when using outputs from an A/V receiver?

I know my current televisions detect a current draw on both inputs, and cause problems where they can't both be connected. I'm hoping the newer televisions don't work that way, and look for a synch signal, then prioritize the S-Video. This way if a standard VHS offers no S-Video signal, the television will default to composite. With S-Video priority, even when both composite and S-Video offer synch signals, the S-Video will be the default. I'm hoping, but it's probably just a pipe dream. If my hope is reality, then I could just use Video 2 for component without needing to turn the component input on and off in the menu according to what video connection I'll need to use.
Thanks for the replies!

This post is made possible by the generous support of people like you and our sponsors:

Parts Connexion

Topic - Question on the JVC AV-36D201/501 televisions - Brad G. 18:52:55 04/19/01 (1)

Re: Question on the JVC AV-36D201/501 televisions - Estes 16:57:30 04/23/01 (0)

You can not post to an archived thread.