Home Video Asylum

TVs, VCRs, DVD players, Home Theater systems and more.

Re: TV "fine" tuning of parameters:for the perfectionist

Elizabeth,

Most TVs are nowhere near adjusted to perfection. I'm not saying you can't fix many of them, but you're way, way, way off base about them adjusted to 95% of perfection. Maybe 25% of perfection is more realistic. If they have convergence right, then I'll give you 60% of perfection from the manufacturer. Here's some of the first things everyone needs to fix.

All sets are delivered to catch your attention on the showroom floor. This is great for a showroom, but not so good for your house. So here's some of the things that are going to be wrong that need to be fixed:

1) They are set to "torch mode", with color temperatures in the 10000K range. Flipping back to 6500K is available on most sets, but this doesn't mean your colour will be anything near correct even so.
Different manufacturers call them different names, I've seen 6500K referred to as Cool, Warm and even Cinema.

2) Colour decoders are inaccurate on just about ever brand of television today, with significant "red push", and many manufacturers are locking you out of the menus to fix this. You have to resort to building attenuators for the red component input.

3) Brightness/Contrast are stepped all the way up. Yes you mention this, I'm trying to be complete.

4) Scan Velocity Modulation is usually engaged, which tends to give you an etched, overly exaggerated sense of detail. On some sets, you have to disconnect wires (Toshiba and Panasonic). Most manufacturers are locking you out of this on their latest sets (when it's menu adjustable)

5) Convergence is usually way off. This is fixable by the end user on some sets and to some extent (9pt consumer convergence is the norm), but not all of them.

If you're lucky, you can get the TV up into the 90's, but that requires some experience.


There are a few things I'm sure I'm missing, but that's my (conflicting) opinion.

An ISF calibration, if you're serious about things (I view this board as enthusiasts unless stated otherwise) the calibration is quite worth it.

Regards,



This post is made possible by the generous support of people like you and our sponsors:
  Schiit Audio  


Follow Ups Full Thread
Follow Ups


You can not post to an archived thread.