Splitting center channel out?

Video Asylum

TVs, VCRs, DVD players, Home Theater systems and more.

156.56.123.60

Hi all. I have a home theatre using speakercraft AIMs for 7 channels in the ceiling (had to be done this way because too much glass and open walls issue). The directionality of the center channel localizes too close to the ceiling. My proposed fix, if it will work, is to take the preout line level signals from my center channel on the denon 4802 and feed all three active audio channels of the television (sony 40xbr700). Since the sony will not allow me to specify a specific audio input and since my denon has only 1 preout for the center channel, I have to split the signal.
Will the aforementioned work (ie. send the center channel only also through the sets speakers)?
Do I need to worry about splitting the signal essentially 4 to 6 ways (the preout center is a single lead, there are stereo ins on the sony for each channel (DBS, DVD, composite) in use. I might only do this on DBS and DVD but still this yields 1 to 4. Are there any amplified splitters for line level? I found a 3 in (l,r,v) to 6 zone splitter but this is overkill.
Thoughts?
rg
Denon 4802
Denon 2800
Speakercraft AIMs (7)
Sony 40XBR700
Sony SATT60

This post is made possible by the generous support of people like you and our sponsors:

Sonic Craft

Topic - Splitting center channel out? - rickgo 18:08:21 01/21/02 (7)

Re: Splitting center channel out? - Frost 12:43:57 01/23/02 (0)

Re: Splitting center channel out? - bmar 19:27:29 01/22/02 (0)

Your entire thought process is overkill - Lasermeister 18:26:09 01/21/02 (4)

Re: Your entire thought process is overkill - rickgo 07:18:25 01/22/02 (3)

Re: Your entire thought process is overkill - bstan 10:02:27 01/22/02 (2)

Re: Your entire thought process is overkill - That may be.... 17:12:27 01/22/02 (1)

You ask for advice and then tell them they are not helpful - alext 15:21:01 01/23/02 (0)

You can not post to an archived thread.