|
Audio Asylum Thread Printer Get a view of an entire thread on one page |
For Sale Ads |
151.151.21.99
Currently I have only one row of seating on the couches that comfortably seats seven people, everyone else has to sit on the floor. I am considering building a raised platform for rear seating so that I can have two rows of couch seating.
For those of you that have two-level seating in your home theater, how much higher is the back row flooring than that of the front row?
thanks......mitch
Follow Ups:
as with most theaters as well.
If a thing's worth doing, it's worth doing well
(Proverb)
My HT room is a converted garage with a slope and a approx. 6" step down from the kitchen door. I made the deck flush (almost) with the kitchen floor but the slope made it about 12" by the time I got to the original floor for the first row seating. I wound up making a last minute decision to add a 2nd step between levels. And if you are lazy/practical, you'll want to make the height consistent with "standard" joist heights + height (width) of your decking material and floor cover.One of my many second guesses was NOT building a subwoofer using the deck as an enclosure. But the deck does shake when the (conventional) subs are working so it could have used more vibration dampening. One HT builder suggested sand "filler" could be useful. I did fill the desk spacing with leftover insulation for sound absorption (original floor was tile) but the carpet on top probable handled most of the "ringing".
Correct answer is deck should be high enough so rear seat folks can see display over front seat folks under most viewing conditions.... A quick solution is put your rear seats on "stilts".
FAQ |
Post a Message! |
Forgot Password? |
|
||||||||||||||
|
This post is made possible by the generous support of people like you and our sponsors: