Video Asylum

stupid question on sub hookup

98.245.212.167

dpy

A

I'm just a two channel guy but I gave my spare sub (standard high and low level inputs, right and left channels)to a friend who is building a HT system. Since his HT receiver has a sub output (single RCA jack), does one simply hook that to either of the two RCA jacks on the back and call it good? I also have a "Y" adapter that could utilize both channel inputs, if needed.

Tangential - do the HT receivers have less subwoofer-level signal in the R and L front channels, which would preclude taking sub input from there?

Finally, if playing music cd's (2 channel), does that sub output probably still carry signal?

Thanks in advance. Gonna go play a record or something now.

Follow Ups:

Depends� - David Aiken 21:55:16 01/30/11 (0)
on the receiver and the sub.

First, the sub. I've got a REL with 2 RCA inputs but both are mono, just wired internally for different gain levels. You only connect to one of them so you run a single connection from the receiver's sub output to one of the sub's RCA inputs. Some subs may have "stereo" RCA inputs and sum the signal from both internally, so you would need to run a Y adapter to them and connect that to the single receiver output. You need to look at the sub's manual to find out what to do with the sub.

Now to the receiver.

AV receivers have inputs for a low frequency effects channel, the ".1" channel in 5.1/6.1/7.1 surround sound recordings. The problem is that the sub output doesn't exclusively take the output from the .1 input channel.

AV receivers have sound management options which you access via the receiver's setup menu. What those options allow you to do is to simply feed the LFE channel to the sub, or to feed it low frequency content from other channels below a crossover frequency you set in addition to any .1 channel signal, or to feed both the sub and the speakers the low frequency content from other channels (what is called "double bass" since you're actually doubling up with the sub and speakers for that content) plus any .1 channel input.

These bass management options work with any input, no matter how many channels, so a 2 channel music input can have the sub handling low frequencies from those 2 channels either instead of the speakers or in conjunction with the speakers if you select the "double bass" option, or you could run the speakers alone without the sub.

At the receiver end it all depends on the choices you make in the setup menu and those can vary slightly from receiver to receiver, especially in relation to the terminology they use to describe the options. You probably need to read the manual in order to understand the options his particular receiver has and, in my experience, the way a lot of this stuff is explained in the manuals leaves a lot to be desired.

David Aiken

Post a Followup:

FAQ

Post a Message!

Forgot Password?

Moniker (Username):
Password (Optional):
	Remember my Moniker & Password (What's this?) Eat Me
E-Mail (Optional):
Subject:

Message:	(Posts are subject to Content Rules)

Optional Link URL:
Optional Link Title:
Optional Image URL:
Upload Image:
E-mail Replies:	Automagically notify you when someone responds.

To view your new posting or follow-up, click on the RELOAD or REFRESH button on your browser.

This post is made possible by the generous support of people like you and our sponsors:

VH Audio