|
Audio Asylum Thread Printer Get a view of an entire thread on one page |
For Sale Ads |
98.19.148.46
In Reply to: RE: I need your help! posted by No Regrets on December 08, 2011 at 10:44:10
The TV you picked out is set up basically to drive a 5.1 to 7.1 surround sound receiver. A surround sound receiver will decode the broadcast 5.1 surround signal from the orange-wire digital output, something that wouldn't likely happen with the signal coming out of the standard 2-channel analog outputs.
But the TV you selected is not a good choice if you plan to listen to the sound using an older 2-channel stereo receiver that lacks a digital input. For that you need a pair of conventional red and white analog outputs on the TV.
I found the manual for your TV on line and I was surprised to see that there were no analog audio outputs.
The choice is to either find a different TV, or plan to buy a surround-sound receiver with a digital input. One other possibility might be to run the analog audio output from the analog outputs from your new cable box. Some cable boxes have analog audio outputs but others may not. I would need to see what the outputs are on the back of the cable box.
David
Follow Ups:
Thank you David for your post. I am shocked also that the tv does not have analog outs....but from what it sounds, this is the way of the future.
My dealer is confident that there will be no issues with hooking it up with the analog RCA outs from the cable box to my amp for sound and then using the HDMI just for the video to my TV.
If this doesn't work, then I'll have to either get a new AV receiver or possibly a DAC might work to, such as a Peachtree NOVA. I hope it doesn't come to that though.
Thank you also for the link to the Panasonic Manual.
Warmest regards,
No Regrets
http://service.us.panasonic.com/OPERMANPDF/TCP42ST30.PDF
Post a Followup:
FAQ |
Post a Message! |
Forgot Password? |
|
||||||||||||||
|
This post is made possible by the generous support of people like you and our sponsors: