Video Asylum

Re: Using denon 4802 with a preamp

12.109.186.150

[ Follow Ups ] [ Post Followup ] [ Thread: Display Email ] [ Video Asylum ] [ FAQ ]

(A)

In Reply to: Using denon 4802 with a preamp posted by Rick on April 02, 2002 at 15:10:36:

Yes this will work just fine. I don't think you'll get a "gross mismatch" between the front and rear speakers as long as you setup the speakers correctly & adjust the volume levels for each speaker as required for the listening position.
If you are listening to DVD-A or SACD then you may be aware of the amplifier differences, but if you are interested in home theater use only for the surround speakers, I don't think you will hear a difference as the effects sent to the rear speakers aren't full range and usually aren't sustained sounds.

Follow Ups:

Re: Using denon 4802 with a preamp - kotches 15:34:15 04/03/02 (1)
Xenon,
DVD-A and SACD should be routing to the side speakers, which are powered by the Krell amplifiers.
The rear speakers should only come into play during movies.
Regards,
- Re: Using denon 4802 with a preamp - xenon101 11:51:01 04/04/02 (0)
  You are correct. I have a 5.1 setup with sides (that are really located at the rear because - well, that's where I have wall space), & in visualizing the setup I called the sides "rear" - well you get the point? My mis-typing due to my personal HT layout.

This post is made possible by the generous support of people like you and our sponsors:

Atma-Sphere Music Systems, Inc.

You can not post to an archived thread.