 
|
Audio Asylum Thread Printer Get a view of an entire thread on one page |
For Sale Ads |
|
|
Audio Asylum Thread Printer Get a view of an entire thread on one page |
For Sale Ads |
63.199.244.168
In Reply to: I really don't know. I like Denon... posted by AbeCollins on December 13, 2004 at 22:56:12:
i use the 5900 connected to the 3805 receiver via 5.1 RCAs and 1 Dlink connector... it outputs all but the SACD signal via the Dlink. I then use the pre-outs to a PSAudio HCA-2 for the front-ends.. soon to be driving some Spendor S5Es to replace the VERY tweaked Athena speakers.... The 3805 as a pre works pretty darned well together with quality power filtering and cabling.... I really like this setup because it gives me great 2 channel audio and killer 5.1 for HT.Sam
Follow Ups:
for a while i was using a little passive pre by CIAudio that they custom modded for me. Basically getting the HT bypass function neat and cheap! So this gem of a little passive has 2 switchable inputs to 1 output..... I had CIAudio re-wire it so that when input 1 is selected it bypassed the attenuator and goes directly to the output. Input 2 gets variable attenuation and output. I take the pre-out signal the Receivers front L/R via input 1 and direct from the 5900 for L/R to input 2. The output goes to the HCA-2..... Works VERY well... flip to 1 and user the HT processor, switch inputs and get a sweet passive pre attenuted direct signal to the HCA-2.Sam
This post is made possible by the generous support of people like you and our sponsors:
Top of Page ]
[ Contact Us ]
[ Support/Wish List ]
[ Copyright © 2024, Audio Asylum, all rights reserved ]
