 
|
Audio Asylum Thread Printer Get a view of an entire thread on one page |
For Sale Ads |
|
|
Audio Asylum Thread Printer Get a view of an entire thread on one page |
For Sale Ads |
Hi, I just bought the projector above and totally confused by the convergence and register setup. Anyone else own this projector and willing to lend a helping hand, pls forward the dealer installation manual to my email add. I have some questions as below :
1. Is there anyway to shut off any of it's 3 lens so I can calibrate it?
2. Is there any grid test mode built in the projector?
3. How do I position the individual color during convergence setup, I mean move the whole red or blue grid? Help SOSSSSS..
Follow Ups:
use lens cover or any thing that can cover it. there is no grid test mode build in i have a vhs tape that use to set up the projector with grid and a manual to set up move the individual grid line can be done by the convergence key board located on the top right of the projector but if it to far off to aligment the three red blue and green line then you need to adjust at the crt neck of the tube next to the yoke clam. rotate the two magnets look like two little handle that stick out at the neck of the crt tube will move the grid line
This post is made possible by the generous support of people like you and our sponsors:
Top of Page ]
[ Contact Us ]
[ Support/Wish List ]
[ Copyright © 2024, Audio Asylum, all rights reserved ]
